CNC Milling - Vertical and Horizonal




• One(1) PFH-4800 Horizontal Machining Center - with two(2) pallets and 80 ATC.

The PFH-4800 is a pallet shuttle system which allows one pallet to be setup while machining is being performed on the other. The PFH-4800 provides high-speed , high efficiency machining with feed rates of up to 2362 IPM for X, Y, & Z axes.  The spindle speed is 12,000 RPM.  Chip to chip time is 2.2 seconds.  Our PFH-4800 is also outfitted with a 4th axis capable of 360,000 positions.  Equipped with Mazatrol Fusion 640 CNC control and Renishaw Touch-Probe.

• One(1) FH-480 Horizontal Machining Center - with six(6) pallet changer and 120 ATC.
• One(1) FH-480 Horizontal Machining Center - with two(2) pallets and 60 ATC.

The FH-480 is a pallet shuttle system which allows one pallet to be setup while machining is being performed on the other. Pallet-to-pallet change takes just five seconds, while tool-to-tool change is a mere 1.3 seconds.  Equipped with Mazatrol Fusion 640 CNC control and Renishaw Touch-Probe.

 The powerful 30 HP spindle drive with 195 ft. lbs. of torque increases productivity immediately. Using a No. 40 taper milling tool, metal removal rates can be achieved at more than 40 cu. in./min. in steel using high torque capabilities, and a blazing 136 cu. in./min. in aluminum with the spindle speed of 12,000 RPM. The top speed can be reached in 1.5 seconds. Our FH-480 is also outfitted with a 4th axis capable of 360,000 positions.

Another outstanding feature of Mazak's FH-480 horizontal machining center is its rigidity. This allows part accuracy and consistency to be maintained anywhere in the machining envelope, with .00004 repeatability, and .00012 accuracy. This is particularly important when multiple parts are loaded top-to-bottom on a tombstone fixture and during heavy-duty, high-thrust cutting.

• One(1) Nexus 510C-II Vertical Machining Center

• Mazatrol Matrix Control
• 48-tool magazine
• 12,000 RPM spindle
• 4th Axis Rotary Table
• Renishaw Touch-Probe
• Wide machining envelope
• Environmentally-friendly – with minimum consumption of pneumatic and electrical power

• One(1) Nexus 510C Vertical Machining Center

• Mazatrol Fusion 640 CNC Control
• 30-tool magazine
• 12,000 RPM spindle
• 4th Axis Rotary Table
• Renishaw Touch-Probe
• Wide machining envelope
• Environmentally-friendly – with minimum consumption of pneumatic and electrical power

• One(1) Nexus 410 Vertical Machining Center

• Mazatrol Fusion 640 CNC Control
• 30-tool magazine
• 12,000 RPM spindle
• 4th Axis Rotary Table
• Renishaw Touch-Probe
• Environmentally-friendly – with minimum consumption of pneumatic and electrical power

• Mazak VQC 20/40 - With M-2 CNC, 10,000 RPM, 30 ATC, Laser calibrated.
  
  

• Mazak VQC 15/40 Verticle Machining Center with 4th Axis Rotary M-2 CNC, 6000 RPM, 30 ATC.
  
  

• Okuma-Howa 3VADS - Two (2) Verticle Twin Spindle Machining Centers with Fanuc 11M CNC, 6000RPM, 24 ATC.

• Mazak Quick Turn Nexus 200MSY- Turning Center with Matrix control, Y-axis milling, chip conveyor, parts catcher, SMW Barfeeder
• Mazak Quick Turn Nexus 200MS - Turning Center with  Matrix control, chip conveyor, parts catcher, SMW Spacesaver

• Main turning spindle from 35 HP
• Second spindle for back-side finishing of parts
• Y-axis milling capability
• Servo tailstock
• Automatic tool eye

• Mazak Super Quick Turn 200MS - Turning Center with 640T PC-Fusion-CNC control, chip conveyor, parts catcher, SMW Spacesaver

• Second spindle for back-side finishing of parts
• Servo tailstock
• Automatic tool eye

• Okuma Crown SB - Turning Center with OSP 700L CNC, chip conveyor, parts catcher, SMW Spacesaver.

• Okuma Model LB-25 - Turning Machine with OSP 5020 CNC, chip conveyor, CNC tailstock, long bed.

• Okuma Model LB-15 - Two(2) Turning Machines with OSP 5000LG CNC, chip conveyor, CNC tailstock,

The above equipment is supplemented with the following:

Copyright © 2008 Vulcan Tool Co. Inc.
Last modified: April 24, 2008